Solids Control Equipment

HCS series mud desander (drilling fluid desander) is a secondary solids control device in the solid phase control system of drilling fluid, and it is one of the important equipment for stabilizing and adjusting the technical indicators of drilling fluid....

Among the accessories of the drilling fluid shale shaker, the shale shaker screen is the main component, and the material and specifications of the screen are also strict. In the actual operation process, the screen clogging problem often occurs, so today...

1. In the normal selection of shale shaker screens , try to choose 304 or 316L stainless steel screens, because they are more wear-resistant, waterproof and moisture-proof. If the screen aperture is too large and the cost is too high, you should choose ma...

Drilling fluid vibrating screen is an important equipment in the solids control system. Its performance directly affects the control effect of the entire solids control system. Therefore, our on-site operators need to understand the process characteristic...

The shear pump adopts a set of mechanical seal for no leakage at stuffing box. Inside pump is a stainless steel turbine containing 44 nozzles, 4 scoops and shear plate. Fifty percent of the fluid is sheared twice each time through the pump....

The petroleum solids control system is mainly used to control and separate the solids of the petroleum drilling fluid, which can make the drilling fluid recycle. It is also called the mud purification system. It is suitable for the drilling process of 200...

What should be paid attention to when assembling equipment for mud circulation tank? 1. Wear labor protection equipment. 2. Work with a certificate. 3. The connecting pipeline is connected correctly, and the valve opens slowly. 4. Pay attention to crushin...

What is the difference between shaftless screw conveyor and shaft screw conveyor? 1. The conveying materials: Shaftless screw conveyor is suitable for conveying materials: sludge, domestic garbage, grille slag, etc. have viscous, entangled materials and b...

How to install the mud cleaner ? Using the correct method to install the mud cleaner can better remove the harmful solids in the drilling fluid, improve the performance of the drilling fluid, and meet the requirements of the new high-pressure jet drilling...

No matter what equipment will fail during use, what will happen to the centrifuge during use? How to troubleshoot the faults? Fault: The motor cannot be started Reasons: 1. The control circuit is short-circuited or the components are damaged; 2. The motor...

What are the daily inspection and maintenance of drilling fluid centrifuges ? 1. What are the main requirements for the inspection of the centrifuge? 1). Check whether all nuts, bolts, and washers are loose, and whether the shield is loose. 2). Check whet...

What is the role of centrifuge in aggravating drilling fluid? The inevitable high solid content of the aggravated drilling fluid, the decrease in the quality of the filter cake caused by the decrease of the particle size with time, the increase of the sta...

What are the design parameters of the drilling fluid gun ? The drilling fluid gun is the purpose of agitating the drilling fluid by generating a high-speed flow of liquid through a nozzle. Because most systems use a low-pressure drilling fluid gun, the fo...

The drilling fluid agitator is a very important supporting equipment for the drilling fluid solids control system. Its purpose is to stir the drilling fluid in the drilling fluid tank to ensure that the useful solid phase in the drilling fluid is evenly s...

1) What should be paid attention to when installing the drilling fluid gun ? The length of the barrel of the drilling fluid gun should be designed and installed according to the depth of the drilling fluid tank. A medium pressure valve should be installed...