How to solve the noise of Drilling fluid agitators?

Drilling fluid agitators sometimes make very loud noises. Someone don't know what happened to this failure or how to solve it. Please read this article down. The following article mainly talks about how to solve the noise of Drilling fluid agitators?



What are the reasons for the vibration and noise of the drilling fluid agitator?

1. The motor and reducer are not fixed properly

2. Worm gear teeth are worn or damaged

3. Bearing wear or failure

4. The connecting bolts on the coupling and the output plate of the agitator are loose, or the anchor bolts are loose

5. Bending and deformation of the pulsator shaft

6. The blade is partially deformed or broken

The solution to the vibration and noise of the drilling fluid agitator

1. Find out the bad parts of the fixation and tighten them correctly

2. Replace the worm gear pair (you can contact our company)

3. Replace the bearing

4. Tighten or replace the bolts

5. Straightening

6. Repair or replace the blades

How to solve the noise of drilling fluid agitators? By reading this article, the customer who encountered the problem may have solved the problem, if your problem has not been solved yet, Please choose us.

HL Petroleum produces full categories of solids control equipment for oil and gas drilling production, such asMud Treatment System,  Drilling equipment, Dessander, Desilter, Vacuum degasser,Shale Shaker, Mud agitator, Jet mud mixer,Sand pump, shear pumps, centrifuge, drilling rig mats, water tank, mud tank etc. These products are widely applied in various fields, such as oil drilling,HDD,mineral separation,CBM exploration,river sand separation.